|
Q: How do I view S-Video on my PC when using AmCap.exe?
A: Follow these steps:
- Download and unzip amcap from the software selections on the right side
- Run amcap.exe
- Click on options
- Click on Video crossbar
- Select S-Video input rather than C-Video input.
- Click OK
- Close amcap.
You are now able to view S-Video in your video applications.
Q: How do I record audio when I have it connected via the included cable?
A:
Double click on the  volume control icon (If there is no icon like this, click on Start, Programs, Accessories, Entertainment, Volume Control). Click on options then properties. Adjust your volume settings for recording (figure 1). Click OK. Be sure that the Mic or Line in (whichever you've plugged the cord that was included with the USBLive! 2 into) is selected (figure 2). |
Figure 1 |
|
Figure 2 |
|
Q: Is the new Mac OSX 10.5 supported?
A: Yes, A driver for Mac OS 10.5 is available at this time.
Q: How does this device connect to my computer?
A: This device connects via a USB 2.0 port on your computer.
Q: Do I have to have an internet connection to use this device?
A: The device can function without an internet connection, however video conferencing does require a connection.
Q: Does this device have built in audio?
A: This device does not have a microphone, speakers, nor audio input, built in. We recommend having a sound card or alternate means to use audio for video conferencing.
Q: How do I connect audio to my VCR/CamCorder?
A: Normally a VCR or CamCorder will have color coded RCA (composite) connectors. You will need to connect the cable that came with the USBLive! 2.0 to these color coded areas. The remaining end of this cable connects to the Microphone or Line-In on your computer.
Q: How do I install the USBLive! 2.0 driver on Vista?
A: For installation instructions, please click on the "USBLive! 2.0 PDF Format" link below Manual.
Q: I have installed the driver, connected my USBLive! 2.0 and camera but do not see an image.
A: The USBLive! 2.0 connects to devices (cameras, camcorders, VCR) via a s-video or composite cable. Make sure the proper video stream is selected on the software application you are using.
Q: After installing the driver and connecting my USBLive! 2.0 device I receive a "System Extensions" error message.
A: This is an irrelevant error. Please ignore the error by clicking OK. After clicking OK you will be able to use the device without any problems or system performance issues. This error might appear every time you reboot your system, but just ignore it by clicking OK. |
